Storage hoods in laboratories
Our laboratory furniture system offers the widest possible selection of storage hoods for ease of access and secure storage. All storage hoods can be variably equipped and permit optimum use of space in all areas of the laboratory. The cabinets can be extended, retrofitted and are compatible – and so can be adapted to new requirements in the shortest possible time.
The melamine resin-faced surfaces are easy to care for and durable to cope with influences in the laboratory. The front edges of the carcass and the shelves feature impact-resistant polypropylene edging.
Special cabinets handle the safe storage of typical items that need to be stored in laboratories: solvents, acids, alkalis and compressed gas bottles, and can also be used for chemical disposal.
Underbench units
Underbench unit on plinth>
The underbench depth of 550 mm and the drawer depth of 500 mm enable optimum use of the storage cupboard.
- Film-coated plinths made of waterproof glued joinery board
- Secure and level position, thanks to four height-adjustable feet
- Permanent solution for the storage of equipment and chemicals according to DIN EN 14727
- Working heights of 750 and 900 mm
- Single doors, double doors, drawers or combination
- Fully extendible drawer, change-pull-out catch and concealed roller guide

Underbench unit on castors>
With four smooth-running castors, two of which can be locked, the moveable underbench units can be very easily pushed into the frame of add-on or laboratory benches. They are absolutely topple-proof, thanks to the drawers’ self-locking protection and the single drawer slide-out lock.
- Flexible solution for the storage of equipment and chemicals according to DIN EN 14727
- Working heights of 750 and 900 mm
- Single doors, double doors, drawers or combination
- Fully extendible drawer, change-pull-out catch and concealed roller guide

Suspended underbench unit>
Suspended underbench units are integrated directly under the worktop or as a moveable version in a cantilever frame.
- Flexible solution for the storage of equipment and chemicals according to DIN EN 14727
- Working heights of 750 and 900 mm
- Single doors, double doors, drawers or combination
- Fully extendible drawer, change-pull-out catch and concealed roller guide

Self-supporting underbench unit for fume cupboards>
- Underbench unit for the storage of equipment and chemicals according to DIN EN 14727
- Service panel above the storage hood for fume hoods with rear panel installation

Push-in underbench unit for fume cupboards>
- Underbench unit for the storage of equipment and chemicals according to DIN EN 14727
- For fume hoods on a steel frame
- Removable rear panel

Underbench unit for sinks>
- Underbench unit for the storage of equipment and chemicals according to DIN EN 14727
- Front end sink or sink with underbench unit for service spines or in front of the wall
- Combined unit with waste disposal

Laboratory cabinets
Suspended cabinets>
Our suspended cabinets are fastened to the service spine or wall without a visible gap.
- For the storage of equipment and chemicals according to DIN EN 14727
- Load bearing capacity per base 30 kg
- Glazed doors are available

Top-mounted cabinet>
Our top-mounted cabinets feature a rail for the secure suspension of ladders.
- Permanently fixed top-mounted cabinet

Laboratory cabinet>
- For the storage of equipment and chemicals according to DIN EN 14727
- Glazed doors are available
- Drawers are available
- Single-door and double-door (450 – 1200 mm width)

Pull-out cabinet>
- Pull-out cabinet for the storage of liquid or solid substances according to DIN EN 14727
- Height-adjustable wire baskets
- Pull-out doors are accessible from both sides
